(include one size / set of the Cutters, Jig, Hold Down Plate, fence, spacer)
Optional Round Pole Cutters $1,860.00 each size per set
Working Capacity:
•Pole Making Size: ¾’ to 9” Width, ¾” to 8” Hight.
•Pole Making Length Minimum 20”, Maximum Unlimited
SPINDLE
•Precision spindles are mfg. of SCM-4 tool steel (imported from MISHIBISHI Japan), heat treated to HR 46° (ROCKWELL C Scale) and.6,200rpm spindle are fitted with class 6 SKF match ball bearings per spindle then mated to precision machined spindle housings.
•Besides, the spindle body and whole bearing house (include the appearance and interior of the bearing house) has been burnished completely.
•So, the high hardness material, and high class SKF ball bearings, and precise spindle body and bearing house, finally by SHEN KO accurate combination technique. The spindle must meet every user’s requirement.
•Spindle tolerance is guaranteed included to (0.002mm / 0.00007") accuracy.
TRANSMIT BELT
•All spindles running are transmitted by V-shaped belt (MITSUBISHI) without slipping problem.
Cutters
•Arbor Size 40 mm
•Cutting Cycle: 1st Bottom 5” Dia., 2nd left 5” to 7” Dia. 3rd left 5” to 7” Dia. 4th Top 5” to 7” Dia. 5th Bottom 5” to 10” Dia.
•Cutting Spindle Motor; 1st Bottom 7.5 HP, 2nd left 15 HP,. 3rd left 515 HP. 4th Top 15HP, 5th Bottom 15HP.
Feed system.
•Motor = 7.5 HP
•Feeding speed, infinitely variable by inverter 20 to 120 fpm (6 - 36 M/min)
•Pneumatic pressure to feed system, 4 set upper feed roller provide powerful feeding.
•Both upper and bottom feed are driven by universal joint drive without chains prevent stock free, more robust, low maintenance, longer life and more accurate.
•Diameter of feed roller: 140mm
•Three set drive table roller
•Infeed drive table roller
•Out feed table roller
•3 stage pressure setting of feed roller, pneumatic roller pressure compensates for large variance in work piece thickness, max. air pressure setting is 6 bar.
Table and fence
•Short infeed table, 5 ft long with 1 driven roller above on table, table harden and chromed.
•Hard-chromed table
•Harden fence. Operation
•Operating panel separate from control cabinet, easy to operate.
•Mechanical digital read-out.
•Mobile jog panel box for setting up.
•Central lubricating for spindle
•Manual oil pump to remove the resin from table. Each table has 2 holes for lubrication.
Safety cover with lamp inside
